Semi-Permanent Outdoor Structures: The Rules That Change as Time Passes
business

Semi-Permanent Outdoor Structures: The Rules That Change as Time Passes

If a tent is used for seven days, it may be considered a temporary structure. However, let it stay standing during a whole season, and building codes may start applying. Semi-permanent outdoor structures lie somewhere between temporary installations and permanent buildings; the more often the structure is used, the more likely it will be subject to building regulations.

Where Does Temporary Stop and Permanent Start?

It all depends on time, primarily. Authorities in Western Australia start by determining whether the object in question is a building and then proceed to check whether the structure is a second-use structure, relating to other purposes. Tent fabric structures are evaluated separately from semi permanent outdoor structures, and sometimes the temporary structures code can provide a performance-based approach.

New South Wales permits the installation of tents, marquees, and stages for private events and community occasions to be classified as exempt development upon certain conditions. Such conditions include written consent from the owner of the land, firm and even ground, and conformity to the manufacturer’s recommendations. This classification applies only to events, and not to ongoing business.

The example of how requirements can change due to the increased length of use is provided by Queensland state. It contains provisions regarding temporary accommodation, which relate to buildings with sleeping compartments or facilities providing services to such compartments or to worker accommodation. Such buildings can stand for two years, and longer than that with local government’s permission. Accommodation for employment or rent for more than 42 days should comply with all building code requirements.

Heat Is Now a Design Brief

Australia had its fourth warmest year on record in 2025, and that’s left us all feeling the heat; our national average temperature was a scorching 1.23°C above the long-term norm. Not only that but maximum temperatures just kept on rising, clocking in at 1.48°C above average. And to top it off every single month was way hotter than usual; we’re talking record temperatures all round. So an outdoor area that’s just fine in spring can quickly become a no-go zone in summer.

So first things first, you need to get some shade going. Pergolas and retractable awnings are a good option, but let’s be honest, they need a fair bit of space; we’re talking a minimum of around 2.4 metres of clearance and preferably council approval too. And then there’s the issue of running costs; fans and misting systems might sound like a bit of a cool-down, but they will hike up your electricity bill no end. Misting systems are especially less effective when it’s already humid and hot; they just can’t compete. On the other hand, shade structures, yeah, they are a bit more upfront, but in the long run, they save you a pretty penny. One last thing, if you are buying a commercial umbrella, make sure it’s got a UPF 50+ rating, and don’t even think about buying a lightweight residential umbrella with a tiny base for goodness’ sake.

Wind, Loads and Your Engineer’s Stamp of Approval

Now if you’re setting up something that’s going to be there for a few months, then you will be exposed to all kinds of weather, not just a quick weekend event. In Queensland, for example, they’ve made things nice and simple by applying the same wind loading requirements to temporary buildings as they do to permanent ones; very sensible decision if you ask me. And don’t forget to account for the shape and cladding of your structure when it comes to ballast; it’s not just about the size of the structure.

Most councils want to see supporting documentation, so that’s something to keep in mind. Some even require professional installation above a certain size limit or they might need some engineering certification, so don’t get caught out. Also make sure your supplier is giving you all the right documentation on wind ratings, anchoring methods and what they’ve assumed about the ground conditions in the design; you get the picture. And remember, if you move that structure to another location, you might need to get all that assessed again too.

And don’t even think about adding any features like sidewalls, heaters or lighting without checking with the designer first; that’s just going to make it heavier or make it more exposed to the wind, and trust me, you don’t want that.

Making Sure the Structure Matches the Use

Now when it comes to design, the use of the space is really what it’s all about. Dining areas need height, ventilation and clear routes for staff to get in and out; you get the idea. Lounge areas are a different story altogether; they’re all about lower ceilings and softer lighting, and waiting areas, well, they just need some good, practical shade and some comfy seating.

But here’s a thing: lots of smaller spaces can be more comfortable for guests than one big open area; people generally prefer to have a bit more shelter, you know? And then there are the materials; you want to choose ones that are going to withstand the elements and look good for years to come. So UV resistance and weather performance are a big deal; it’s not just about how it looks at the beginning.

A Decision That Can Easily Be Undone

One of the big advantages of semi-permanent structures is that they can easily be taken down; panels can come off, frames can be relocated and the lawn can get its life back. And that’s something that venues can really take advantage of; test the waters, so to speak, before committing to something more permanent.

But here’s the thing: removal should be a consideration right from the get-go. You should check what you need to do to get the necessary approvals, how long they’ll last and what’s involved in renewing them. You should also make sure you’ve got a plan for taking out the footings and the services, and don’t let things drag on for so long that the structure becomes a permanent fixture because of it.

Gavin Hampton

Contributing Expert

An industry specialist contributing to Finsbury Pumps Insights.

Related Insights

Leave a Comment

Your email address will not be published. Required fields are marked *