Buying a Pool Pump in Perth? Check the Label Before the Price
business

Buying a Pool Pump in Perth? Check the Label Before the Price

There are many instances where pool owners purchase a new pool pump without thinking much about what type of pump is compatible with their pool, whenever their old pool pump malfunctions over a weekend. There is a way for anyone searching for pool pumps for sale in Perth to make a wiser decision while choosing one.

What Is Shown on the Label and What Is Not?

Under the energy efficiency regulations of Australia, any pool pumps for sale Perth that fall under the energy regulations must have a star rating and Energy Rating Label that shows their annual electricity usage. It is the result of testing all pumps under similar conditions and therefore provides a fair comparison of all energy-efficient pool pumps.

It applies to all single-phase pool pumps with pools and spas above 680 litres.

Two Pumps, One Pool, How Electricity Costs Can Really Vary

Australia’s national energy rating website gives us a comparison example using a 50,000-litre pool, and it’s revealing. Here, an 8-star pump uses around 346 kWh per year, while a 3-star model eats up about 824 kWh. That’s some pretty big differences in terms of energy usage, and we need to bear in mind that actual consumption will vary depending on pool size, operating hours and electricity tariffs.

The lower-rated pump is a real money sucker, consuming more than twice as much electricity in this example. To put your costs into perspective, you can estimate your annual running costs by multiplying the label’s electricity consumption by your household electricity rate. Let’s say you’re paying 33 cents per kWh for the sake of argument, then the 8-star pump would set you back around $114 per year, compared to a whopping $272 for the 3-star pump. Do the maths before you buy and you might end up with a better value for your money.

Pumps, Speed, Noise and the Impact of Off-Peak Electricity

When it comes to energy efficiency, the government figures tell us that variable-speed motors are the way to go, especially for pool pumps. These motors can run at lower speeds during everyday filtration and crank it up when you need more water flow. While the energy rating is just as important as the upfront cost, it’s worth keeping an eye out for.

Noise is something to consider too, especially if you’re planning to run your pump overnight using off-peak electricity. But be aware, running a pump at off-peak hours only saves you money if your household has a tariff that offers cheaper rates during those hours. So make sure you check your tariff before setting a timer, or else you might end up moving your electricity usage to a different time without saving a thing.

Does Cutting Pump Hours Really Save You Money?

Cutting back on pump operating hours might seem like an easy way to lower your electricity bill, but if you’re not careful, you might end up with cloudy pool water. The Western Australian health guidance says that the entire pool volume should pass through the filter every six to eight hours, which means that an undersized pump might struggle to get the job done, while an oversized one just guzzles extra electricity. Pool volume plays a big part in determining the right flow rate, so if you’ve got a small plunge pool versus a large backyard pool, you’ll need to do things differently.

On top of that, the guidance recommends running the filter whenever people are swimming and for at least an hour afterwards. If your filter is dirty, or your pipes are long and narrow, or you’ve got a number of other issues, then your pump’s going to have to work harder.

Questions to Ask Before Buying a Pool Pump

So, here are a few questions to ask yourself when you’re comparing pool pumps:

  • Does the pump actually have an Energy Rating Label, and has it been registered for sale in Australia?
  • What star rating and estimated annual electricity consumption does the label say it uses?
  • Will the pump actually work with your pool’s volume, plumbing and existing filter?
  • How much noise is it going to make during its intended operating hours?
  • What’s covered by the warranty, and can you get your pump serviced locally?

It’s also worth getting a written quote that shows the energy rating, estimated annual electricity use and pool volume, that way you can easily compare different offers. And don’t forget to check on spare parts availability and local servicing, even if it’s not something you need right away.

Gavin Hampton

Contributing Expert

An industry specialist contributing to Finsbury Pumps Insights.

Related Insights

Leave a Comment

Your email address will not be published. Required fields are marked *